Products

BRICK VENTS - EMBER MESH - FOLDED - SIZES: 230X75 & 230X165

We manufacture and supply folded Brick Vents in STAINLESS, COLOURBOND, GALVANISED and ZINCALUME STEEL

They have special Bushfire Ember Proof Mesh attached to the rear side of each vent.

They are used as standard home vents to place into brick walls.

They can also protect homes against embers during fires and insects whilst still allowing good ventilation.

We no longer have spot welds visible on face, so they now look better than any brick vent out on the market.

Below are examples of our new improved Stainless Steel & Colourbond Brick Vents in both sizes: 75mm & 165mm high x 230mm wide..

Below is an example of our new Colourbond 230mm wide x 165mm high Brick Vents - in "Shale Grey" Colourbond.

Our Brick Vents come in two standard sizes:

230mm wide x 75mm high with 25mm folded sides (to suit single brick height hole).

&

230mm wide x 165mm high with 25mm folded sides (to suit double brick height hole).

Our Brick Ember Vents are made to suit standard Australian sized bricks

The vents are able to be used to brick into a wall and hold in place with the protruding tabs inside the mortar.

We also can supply without side tabs incase you have another purpose in mind and don't intend to brick into the mortar.

But for most applications involving brick walls you will need the side tabs in order to lock into place with mortar.


BRICK VENTS 230MM wide X 75MM high - STAINLESS STEEL, Folded, Ember Proof Mesh and Side Tabs 

The following pictures below show our new improved Brick Ember Vents - 230 x 75 with side tabs and with 25mm 90 degree single folded sides.

These new improved 230 x 75mm high Brick Ember Vents have 3 LOUVRES PRESSED in them, which are also longer for improved airflow.

This type has no spot welds on front face.

These 230 x 75 Brick Ember Vents fit a standard one brick wide and high opening.

Total Air Opening / Flow: 38cm2 approx.

Price = $23.00 ea

**All prices in Australian dollars**

Price includes gst


BRICK VENTS 230MM wide X 75MM high - STAINLESS STEEL, Folded, Ember Proof Mesh - No Side Tabs - 2 slits

The following pictures show our Brick Ember Vents 230 x 75 without side tabs

Price = $21.10 ea

**all prices in Australian dollars**

Price includes gst


BRICK VENTS 230MM wide X 165MM high - STAINLESS STEEL, Folded with Ember Proof Mesh & Side Tabs

The following pictures show our Brick Vents Stainless Steel- 230 x 165 with 25mm folded sides and 4 side tabs

We now have improved this product to our new design which does not have any spot welds on front face.

Our new 230 x 165 Brick Vent design now has 7 slots and widest possible length of louvres!

Will suit a single brick wide x two brick high opening in wall cavity.

Total Air Opening / Flow : 88cm- Will suit a 100mm diameter pipe (As 100mm diameter pipe is only 78.5cm2)

Price = $31.00ea (includes gst)

**All prices in Australian dollars**

Price includes gst


BRICK VENTS 230MM wide X 75MM high - COLOURBOND STEEL, Folded with Ember Proof Mesh & Side Tabs

The following pictures show our Brick Vents COLOURBOND Steel- 230 x 75 with folded sides and 4 side tabs

We now have improved this product to our new design which does not have any spot welds on front face.

Our new 230 x 75 Brick Vent design now has 3 slots and widest possible length of louvres!

These 230 x 75 Brick Ember Vents fit a standard one brick wide and high opening.

Total Air Opening / Flow: 38cm2 approx.

Any COLOURBOND colour available as long as we can obtain readily from supplier.

Price = $23.00ea (includes gst)

Please tell us colourbond colour required or write to us at speedex@speedex.com.au

We usually require minimum QTY = 12 off for price to be as shown due to obtaining minimum material in particular colour.

If you need in colourbond you are welcome to write to us at speedex@speedex.com.au for quote.

 

**All prices in Australian dollars**

Price includes gst


BRICK VENTS 230MM wide X 165MM high - COLOURBOND STEEL, Folded with Ember Proof Mesh & Side Tabs

The following pictures show our Brick Vents COLOURBOND Steel- 230 x 165 with 25mm folded sides and 4 side tabs

We now have improved this product to our new design which does not have any spot welds on front face.

Our new 230 x 165 Brick Vent design now has 7 slots and widest possible length of louvres!

Will suit a single brick wide x two brick high opening in wall cavity.

Total Air Opening / Flow : 88cm- Will suit a 100mm diameter pipe (As 100mm diameter pipe is only 78.5cm2)

Price = $31.00ea (includes gst)

Please tell us colourbond colour required or write to us at speedex@speedex.com.au

We usually require minimum QTY = 12 off for price to be as shown due to obtaining minimum material in particular colour.

If you need in colourbond you are welcome to write to us at speedex@speedex.com.au for quote.

**All prices in Australian dollars**

Price includes gst


BRICK VENTS 230MM wide X 75MM high - ZINCALUME STEEL, Folded with Ember Proof Mesh & Side Tabs

The following pictures show our Brick Vents ZINCALUME Steel- 230 x 75 with 25mm folded sides and 4 side tabs

We now have improved this product to our new design which does not have any spot welds on front face.

Our new 230 x 75 Brick Vent design now has 3 slots and widest possible length of louvres!

These 230 x 75 Brick Ember Vents fit a standard one brick wide and high opening.

Total Air Opening / Flow: 38cm2 approx.

 

Price = $23.00ea (includes gst)

**All prices in Australian dollars**

Price includes gst



BRICK VENTS 230MM wide X 165MM high - ZINCALUME STEEL, Folded with Ember Proof Mesh & Side Tabs

The following pictures show our Brick Vents ZINCALUME Steel- 230 x 165 with 25mm folded sides and 4 side tabs

We now have improved this product to our new design which does not have any spot welds on front face.

Our new 230 x 165 Brick Vent design now has 7 slots and widest possible length of louvres!

Total Air Opening / Flow : 88cm- Will suit a 100mm diameter pipe (As 100mm diameter pipe is only 78.5cm2)

Not actual picture! Pictures coming soon!

Price = $31.00ea (includes gst)

**All prices in Australian dollars**

Price includes gst


BRICK VENTS 230MM wide X 75MM high - GALVANISED STEEL, Folded with Ember Proof Mesh & Side Tabs

The following pictures show our Brick Vents GALVANISED Steel- 230 x 165 with 25mm folded sides and 4 side tabs

We now have improved this product to our new design which does not have any spot welds on front face.

Our new 230 x 75 Brick Vent design now has 3 slots and widest possible length of louvres!

These 230 x 75 Brick Ember Vents fit a standard one brick wide and high opening.Total Air Opening / Flow: 38cm3 approx.

Picture not actual product!! Pictures coming soon!

Price = $23.00ea (includes gst)

**All prices in Australian dollars**

Price includes gst



BRICK VENTS 230MM wide X 165MM high - GALVANISED STEEL, Folded with Ember Proof Mesh & Side Tabs

The following pictures show our Brick Vents GALVANISED Steel- 230 x 165 with 25mm folded sides and 4 side tabs

We now have improved this product to our new design which does not have any spot welds on front face.

Our new 230 x 165 Brick Vent design now has 7 slots and widest possible length of louvres!

Total Air Opening / Flow : 88cm- Will suit a 100mm diameter pipe (As 100mm diameter pipe is only 78.5cm2)

Price = $31.00ea (includes gst)

**All prices in Australian dollars**

Price includes gst


 

Copyright © 2021 Speedex. All Rights Reserved.    |   eCommerce Solution by: Netwizard Design

www.speedex.com.au "Speedex"  |  Ph: 0061 3 9459 3460  |  Fax: 0061 3 9458 4091  |  Email: speedex@speedex.com.au