Products

JAGUAR MK2 BONNET- louvers pressed directly into existing bonnet

We have pressed in 4 rows of 15mm wide x 150mm long louvers pressed directly into an existing jaguar MK2 Bonnet shown in pictures below.

For customers wishing to press louvers into their existing bonnets we can do for you so please email us speedex@speedex.com.au and let us know what you would like.

Please note, in this case we had to remove paint off top panel and also the sound proffing tar underneath panel in order to be able to successfully press louvers

into the existing bonnet - as the paint was quite thick. Even though sometimes we can press louvers directly into existing painted panels if the paint is thin, we now as a rule prefer

to remove paint or any surface coating on the top and bottom of just the area we are pressing (prior to pressing) in order to prevent any issues with pressing, as unlike sheet metal great care is required to

do correctly first time without unforeseen issues. Also please note that existing paint in the immediate vacinity of pressing louvers will tend to crack as it is bent to shape, so you will have to re- paint panels after pressing.

Also we have to inspect the curvature of the bonnet and also if there is any ribbing underneath the bonnet so we can arrange louvers best we can with space available. If curvature is very great, depending

on orientation of louvers a shorter louver may be preferable, so we dont sqaush or deform panel when pressing louvers in them.  

 

 

This is the finished product that our customer Charles Warhurst has proudly showed us of his MK2 Jaguar which turned out great example of what can be achieved and help

cool the engine, when you have a big motor under the hood.

Copyright © 2019 Speedex. All Rights Reserved.    |   eCommerce Solution by: Netwizard Design

www.speedex.com.au "Speedex"  |  Ph: 0061 3 9459 3460  |  Fax: 0061 3 9458 4091  |  Email: speedex@speedex.com.au