Rounded Corner Tuckpointing Tools
ROUNDED CORNER TUCKPOINTING TOOLS - FLAT BOTTOM TOOLS
ROUNDED CORNER TUCKPOINTING TOOLS - SQUARE BEADED
ROUNDED CORNER TUCKPOINTING TOOLS - ROUND BEADED
We also manufacture Rounded Corner Tuckpointing Tools for rounded shaped bricks, so that you can tuckpoint around special rounded corner brickwork.
We decided to recently offer only one standard length of 100mm long (100 to 105mm long approx). And we will be updating the photos below soon.
All Rounded Corner Tuckpointing Tools are available in all profiles so either "Flat", "Round Beaded" or "Square Beaded".
The Rounded Corner Tuckpointing Tools shown below are examples of some "Round Beaded" types that we have manufactured: namely a 75mm x 8mm Round Beaded, 75mm x 6mm Round Beaded, 100mm x 11mm Round Beaded, 100mm x 8mm Round Beaded, 100mm x 6mm Round Beaded & 100mm x 5mm Round Beaded. Please note we no longer manufacture the shorter 75mm long Rounded Corner Tuckpointing tools.
***PLEASE NOTE WE NOW SUPPLY ONE LENGTH IN ROUNDED CORNER in the 250mm Radius. WHICH IS AROUND 105MM LONG, WHICH WE ARE CALLING 100MM LONG ROUNDED CORNER TUCKPOINTING TOOL. This is the most common Rounded Corner tuckpointing tool.
However we also manufacture another smaller Rounded Corner Tuckpointing Tool which has a much smaller or 45mm Radius- we currently only manufacture these in FLAT BOTTOM (not beaded)
**We manufacture Rounded Corner Tuckpointing Tools in both FLAT BOTTOM and BEADED.
We plan to update this webpage as soon as possible.
The Rounded Corner Tuckpointing Tool shown below is a 100mm long with a 5mm Round Beaded profile.
An example of rounded brickwork is shown below.
The picture above has concave bricks which have quite small radius or curvature in the bricks so would probably require a 45mm radius Rounded Corner Tuckpointing Tool shown below which we can also supply.
Longer 100mm -105mm Rounded Corner Tuckpointing Tools which have a 250mm radius curve ground in are available in both Standard Flat bottoms and also Beaded profiles (square and rounded). The 45mm radius Rounded Corner Tuckpointing tools are only available in flat bottoms.And available in a wide variety of thicknesses.
Please write to us at speedex@speedex.com.au with your custom requirement and we will make a custom tool to suit as we do not normally keep in stock, but can make up for you in between 1 - 5 days.
The pictures shown below are of a Rounded Corner Tuckpointing Tool 75mm long Sqaure Beaded 10mm-S
Please note we only show mainly "beaded" Rounded Corner Tuckpointing Tools in Pictures below, but we also supply alot of Rounded Corner tools in just Standard Flat Bottoms.
The following pictures are showing our Rounded Corner Beaded Tuckpointing tools that are 5mm Square Beaded and are now our standard length of 100mm long.
There are no products to list in this category.